1.настройка на гланц
Switch on the dishwasher
using the ON/OFF button, wait for 10 seconds and then switch
it off using the ON/OFF button. Press the Start/Pause button
4 times. The rinse aid indicator lights up (set to factory level).
Adjust the level of rinse aid supply using the WASH CYCLE
SELECT knob. There is a rinse aid level for every wash cycle
(0 to 4).
Press the ON/OFF button to save the setting.
2. настройка за сол
This dishwasher offers a setting which helps to reduce pollution
and optimises washing performance in accordance with the
water hardness level in your area. This information can be
obtained from your local water supplier.
- Switch the machine off using the ON/OFF button and open
the door.
- Set the SELECT WASH CYCLE knob first to wash cycle 5, then
to wash cycle 1, then to wash cycle 5 again.
- Press the ON/OFF button; the wash cycle phase indicator lights
will flash. It is now possible to select the water hardness level.
There is a water hardness level for every wash cycle:
E.g.: wash cycle 1, water hardness level 1
wash cycle 2, water hardness level 2, etc. etc., up to maximum
5* levels.(water softener set to medium level).
Press the ON/OFF button to save the setting.
Even if using multi-functional tablets, the salt dispenser should
still be filled.
успех